Bluebow Drywall Sander with Dust Collection

    Drywall sanders · Drywall sander · 1000 W

    Bluebow Drywall Sander with Dust Collection

    $189.99
    • 2,100 rpm
    • 1,000 W
    • Storage case

    Opens the exact option at our retail partner, where the price is confirmed and you check out.

    In the box

    • Drywall sander, 1000 W, with telescoping pole
    • 30 sanding sheets: 80 to 240 grit plus six non-porous sheets
    • 6.5 foot vacuum hose, dust bag and three hose adapters
    • Carrying bag, hex wrench, two carbon brushes, goggles, earplugs and a mask

    Specs

    ShelfDrywall sanders
    TypeDrywall sander
    Speed2,100 rpm
    Power1,000 W

    Fits and works with

    Drywall and joint compound, painted walls, ceilings, loose plaster and cement walls, with hook-and-loop sanding discs. The Bluebow replacement discs fit the head.

    About this tool

    A sander on a pole with the dust drawn off at the head

    Our drywall sander is a 1000 W corded machine for the part of a renovation everyone dreads: sanding joint compound on walls and ceilings. The head pivots through 360 degrees and sits on a telescoping aluminum pole that runs from 4.9 to 6.2 feet, so a ceiling is reached from the floor, and a 120 degree swing on the extension gets into corners. Nine speed settings run from 800 to 2,100 rpm and show on a digital display, and two layers of LEDs under the head light the wall you are sanding.

    Dust is the whole argument for the machine. A 6.5 foot hose runs from the head to the dust bag or, through one of three adapters, to a shop vacuum, so the fine compound dust is drawn off where it is made. The bag holds thirty sheets of sandpaper, four each of 80, 100, 120, 150, 180 and 240 grit plus six non-porous sheets, a hex wrench, two spare carbon brushes, and a pair of goggles, earplugs and a mask. The replacement discs on the same shelf keep it going.

    Compare the Drywall Sander with Dust Collection with the 1 other tool on the drywall sanders shelf, all part of the Bluebow flagships.

    • Nine speeds, 800 to 2,100 rpm

      Slow for a skim coat you want to keep, fast for a ridge of compound, and the display shows the number.

    • 360° head on a 4.9 to 6.2 foot pole

      A ceiling from the floor, a wall from a stand, corners through the 120 degree swing on the extension.

    • Hose to a bag or a vacuum

      Dust leaves at the head through a 6.5 foot hose, and three adapters fit the hose to a shop vacuum.

    Before you start

    Drywall dust is fine and carries talc, mica, gypsum and silica. NIOSH measured sanders at up to ten times the OSHA limit for total dust; run the hose to a vacuum or the bag, wear the goggles and the mask, and keep the room ventilated.

    Questions

    About the Bluebow Drywall Sander with Dust Collection

    Can you connect the Bluebow drywall sander to a shop vacuum?

    Yes, through one of the three hose adapters in the bag; the 6.5 foot hose otherwise runs to the dust bag.

    More drywall sanders and neighbors from Bluebow

    All products